Are you wondering: “How long does a Dewalt battery take to charge?” Figuring out the charging time for Dewalt batteries isn’t always a cut-and-dry answer. It largely depends on battery capacity, voltage, age of battery, charger type, as well as voltage and amperage outputs!
For example, when using an ultra-fast DCB118 charger to charge up your 20 MAX 5Ah DeWalt tool, it usually takes around an hour to be fully powered again. Lower voltages and capacities would likely take longer.
Keep reading below if you’d like more in-depth insight into how long various sizes and capabilities can potentially take until ready to use.
Table of Contents
How Long Does Dewalt Battery Take To Charge?
Charging times for Dewalt batteries can vary significantly due to their size and voltage. Higher amp-hour ratings take longer to charge than those with lower values, as do larger capacity (amp-hours) cells, which take more time compared to smaller ones. Not only this, but higher voltages too add additional duration to the whole process, making a definite effect on total recharging periods.
For example, your typical 20V MAX battery takes around an hour to charge with a charge voltage of 20V and an amperage of 6.0A, but one with a higher Ah rating (such as 10 Ah) will naturally take longer since more electricity has been stored in there!
On the flip side, if you use something like 12 amp fast chargers for these same kinds, they usually get fully juiced up faster than normal 24 volt, 5.0 amp units, but at times overheating issues may arise, so do be sure to stay away from such chances whenever possible.
Other factors that can affect the charging time include:
- How old your battery is: As your battery ages, its capacity to maintain a charge may drop. A brand new one could stay juiced up longer or even quicker than an older one. Battery condition is also linked with the amount of time needed to charge it completely!
- Ambient temperature: Hot summer days can hamper quick charges, especially if you’re doing so outside! That’s why temperatures in winter often offer superior fast-charging opportunities compared to sweltering heat waves. In addition, direct exposure to extreme conditions like high or low temperatures can trigger fatal blows and reduce longevity too.
How long does a 60V Dewalt battery take to charge?
It’s not unusual for it to take up to two hours before a 60V/6.0Ah Dewalt battery is fully charged—assuming the use of a 36V/28V fast charger, that is. With more inferior types or slower models of chargers, though, you can probably expect longer periods until they achieve peak efficiency levels again!
How long does a 20V Dewalt battery take to charge?
Figuring out how long a 20-volt battery takes to charge can depend on two factors: the type of 20-volt power source and its accompanying charger.
For instance, if you have a Dewalt device featuring a 5Ah unit and it’s being charged with an average speed charger, approximately one hour should pass before reaching completion status. Alternatively, taking advantage of rapid charging techniques may decrease that estimated period down to around thirty or forty minutes, depending upon the specs associated with both products in tandem use.
How long does a Dewalt 18V battery take to charge?
A 24V charger with a 5A output? Enough to power up an 18V 2.0Ah battery! Just 40 minutes, and it’s good to go! But if the charger is upped in amperage to 6, you can cut that time back significantly — 30 minutes for full charge completion! Now if 12 amps seem like too much but time efficiency strikes as more important, a 20- or even 25-minute runtime get your desired results.
How long does a Dewalt 12V battery take to charge?
The batteries from 12V MAX 2Ah to 5Ah differ in charge times. For instance, a recharge for the small capacity one of those will take roughly 20–30 minutes with a 24V/5A charger, while 40–50 minutes for 3 Ah, and up to 70–90 minutes are needed if it’s a battery 12 V max at 5 Ah!
How Long Should I Charge My Dewalt Battery The First Time?
If you’re looking to ensure the most optimal performance out of your battery, then charge it up fully at least once. Allow for a minimum time frame of 8 hours—overnight is preferable—so that every cell can receive an adequate amount.
Be sure to follow any recommended instructions provided by the manufacturer regarding charging times in order to prevent voiding warranties and maximize the lifespan of such a valuable investment!
Tips for Optimizing Dewalt Battery Charging Time
Get back on track quickly by optimizing the rate at which your Dewalt battery charges. Utilizing certain strategies can help expedite how long it takes to fully replenish those energy reserves!
Use the right charger
In pursuit of a speedy charge-up for your Dewalt battery? Don’t take risks! Invest in the right charger; failure to do so can extend charging times or, worse, cause serious harm like damage to your battery, even possibly causing a fire.
Keep the battery cool
Charge at the right time
It’s important to recharge your battery as soon as it starts running out, rather than waiting until you’ve completely used up all the power. Not only will this reduce charging time but also help preserve performance—typically, you’ll find that when a tool is nearing the end of its energy reserves, functionality may slow down considerably. So avoid any frustrations and proactively start topping off on electricity!
Consider Buying a Fast Charger
If you’re in need of a quick power boost for your cordless tool battery, Dewalt’s fast chargers could be the perfect solution! Not only can they charge your battery in just thirty minutes, as opposed to other slow-charger options that take much longer, but they also come with added safety benefits such as protecting from overcharging and supplying an optimized charge rate, making them well worth investing in if speed is key.
Use the right battery for the job
Do you ever feel like your power tools demand too much from the battery? Worry no more—just get yourself a high-capacity battery! These batterues can significantly reduce how often one needs to recharge, ultimately saving time and money in the long run.
Follow the manufacturer's guidelines
FAQs
Is it OK to leave the Dewalt battery on the charger overnight?
Absolutely. In fact, a feature called maintenance mode is built into many of the chargers that allows your device to stay ready and at full power whenever you need it — even overnight.
Can you charge a 12V DeWalt battery on a 20V charger?
How do I know when my 12-volt lithium battery is fully charged?
You can tell by keeping an eye out for when the red LED turns green; this means that your premium 12-volt battery is completely topped up with juice and moved onto float charge—essentially in ready mode.
Conclusion
Maximizing the performance of your Dewalt power tools starts with understanding their battery charge times. It’s crucial to take note of how long each type takes to fully juice up and consider if you need a different charger for quicker charges. Plus, keeping them cool by following manufacturer guidelines can optimize re-energization even more – so be sure to familiarize yourself now for effective tooling later!
James is an engineer and a professional blogger. He has gained extensive experience over the years, handling all types of power projects. He loves to share his experiences with all things related to batteries, generators, and other power-related topics.
